Calibration Testing
Pressure Instruments
Specifications:
Model: DPI 104-1
1. Range: -1 to 2 bar
2. Range: -1 to 20 bar
3. Range: 0 to 350 bar, Resolution: 10 mbar
Accuracy: 0.05% FS (including non-linearity, hysteresis, repeatability and temperature effects from –10 to 50°C)
Units: KPa, MPa, kg/cm2, psi, mbar, bar, inHg, inH2O, mH2O, mmH2O and mmHg (Total 11 pressure units can be selected by the user)
Burst Pressure: 2 x working pressure Display LCD Display, with following information – Pressure reading, in 5 digit – % of full scale pressure indication, in 2.5 digit – Bar graph indication, in 20 segment
Wetted parts: All stainless steel (316) or Inconel welded pressure cavity for compatibility with aggressive media
Pressure port: ¼ BSP male male for units to 10,000 psi (700 bar)
9/16 x 18 UNF male cone connections 15,000 psi
(1000 bar) and 20,000 psi (1400 bar) units
Voltage output: 0 to 5VDC (Proportional to the pressure reading or Set to a fixed value, user programmable)
Alarm output: Open drain FET
Battery: 9V alkaline, type MN1604
Case material: ABS/PC plastic sealed to Type 4 / IP65
Features: Minimum/Maximum value (user settable) – Switch Test function (from an external pressure switch) – Menu and tare lock function – Adjustable mounting positions (will rotate 320° around the pressure fitting & the face plate can be rotated in any orientation for optimum visibility) – Large, easy to ready display with five digit resolution.
Calibration Testing
Pressure Instruments
Model: DPI104-3
Range: 0 to 1000 bar
Specifications:
Accuracy: 0.05% FS (including non-linearity, hysteresis, repeatability and temperature effects from –10 to 50°C)
Units: KPa, MPa, kg/cm2, psi, mbar, bar, inHg, inH2O, mH2O, mmH2O and mmHg (Total 11 pressure units can be selected by the user)
Burst Pressure: 2 x working pressure Display LCD Display, with following information – Pressure reading, in 5 digit – % of full scale pressure indication, in 2.5 digit – Bar graph indication, in 20 segment
Wetted parts: All stainless steel (316) or Inconel welded pressure cavity for compatibility with aggressive media
Pressure port: ¼ BSP male male for units to 10,000 psi (700 bar)
9/16 x 18 UNF male cone connections 15,000 psi
(1000 bar) and 20,000 psi (1400 bar) units
Voltage output: 0 to 5Vdc (Proportional to the pressure reading or Set to a fixed value, user programmable)
Alarm output: Open drain FET
Battery: 9V alkaline, type MN1604
Case material: ABS/PC plastic sealed to Type 4 / IP65
Features: Minimum/Maximum value (user settable) – Switch Test function (from an external pressure switch) – Menu and tare lock function – Adjustable mounting positions (will rotate 320° around the pressure fitting & the face plate can be rotated in any orientation for optimum visibility) – Large, easy to ready display with five digit resolution
Calibration Testing
Calibrator with Hart Configuration
Model: DPI 620G
A Complete combines an advanced multi-function calibrator and HART /Foundation Fieldbus communicator.
Support universal and common practice commands as found in issue 7 of the HART specification.
Complete Device Description Library for all HART devices.
Communicates with virtually all HART devices
View, change, clone and store device configurations
Work off-line to create and change configurations
Transfer device configurations to your PC
Measure and source analogue variables without secondary calibration equipment
It’s easy to upgrade Genii with free of charge software and latest DD library thro’ our website
Supports single device and multi-drop modes
Read and write device details
Configure process variables
Adjust sensor and analogue trim
Integral 24V loop power supply for energizing the HART devices and loops. Essential during plant shut downs or for bench top configuration
Menu selectable 250 ohm loop resistor
Measures mA and sources the primary variable for device trims and calibration
Larger memory capacity: Portable type with 4GB Internal memory and expandable memory up to 25GB is required.
USB master for connecting accessories and peripherals such as printers
USB slave for connecting to a PC
Smart phone technology Colour display with Video Quality touch screen. Size: 110 mm (4.3 in) diagonal; 480 x 800 pixels
Operating temperature: -10° to 50°C
Storage temperature: -20° to 70°C
Ingress Protection: IP65 (Dust-tight, jets of water)
Humidity: 0 to 90% RH non-condensing
Shock / Vibration: BS EN 61010:2001; Def Stan 66-31, 8.4 cat III, 1 m Drop Tested
EMC Electromagnetic compatibility: BS EN 61326-1:2006
Size: 183 x114 x 42 mm (LWH)
Approval : CE Marked Weight: Approx. 575 g – battery included.
Power supply: Lithium-Polymer battery, universal mains adaptor/charger
Calibration Testing
Pressure Instruments
Model: PV 411A-P
Specifications
Range Vacuum: Up to 95% (Approx. -950mbar @ 1000mbar amb.)
Pneumatic Pressure: 0 to 40 bar (Air)
Pressure/vac. : Valve Pressure/vacuum selection and fine control release
Adjuster sensitivity Vacuum: Vacuum : < 0.1 mbar
Pneumatic pressure: < 0.1 mbar up to 300mbar, 10mbar@30bar
Minimum strokes: Vacuum : 5 (0 – 90%)
Pneumatic Pressure: 2 @ 2 bar, 30 @ 40 bar
Stroke restrictor: Limits the pressure generated per stroke
Adjustable protection valve: Adjustable overpressure protection is available from 30 bar onwards
Pneumatic – Vacuum: Pressure drop after a stabilization time of 3-4 minutes, 0.003 bar/minute at maximum vacuum of – 0.945 bar
Pneumatic – Pressure: Pressure drop after a stabilization time of 3-4 minutes, 0.1 bar/minute at maximum pneumatic pressure of 40 Bar/ 60 bar
Ports: Multi-axis G ¼ ports
Calibration Testing
Pressure Instruments
Hydraulic Comparator
Specifications
Range: 0 to 1200bar
Pressure transmission medium: Hydraulic fluid from mineral oil/clean water, free of calcium-carbonate 1)
Reservoir: 170 cm³
Test item connection: 2 x G ½ female thread, loose union connection
Distance between test item connections: 290 mm
Piston diameter, low-pressure piston: 31.2 mm
Piston diameter, high-pressure piston: 12.7 mm
Displacement approx.: 10 cm³
Wetted parts: Austenitic stainless steel, high tensile brass, nitrile rubber
Operating temperature: 0 … 40 °C
Dimensions: 401 x 397 x 155 mm (W x D x H), for details, see technical drawings
Weight: 13.5 kg
Calibration Testing
Pressure Instruments
Comparison Test Pump (Gauge Comparator)
Specifications
Model: GCL 700 SP (spl)
Range: 0 to 700 bar
Technical specification:
Two swivel test ports
Fine adjustment system of pressure
Fitted with compact manifold block
Calibration Testing
Digital Pressure Gauge
Model MGA N32-2
Display : 128X64 Backlit Graphic Display showing various pressure units
Along with LO BAT, MIN, MAX & BAR GRAPH
Range : -1 to 2 bar
Least count : 0.0001 bar
Accuracy : 0.05 % FS
Pressure media : DRY AIR ONLY
Enclosure : 90 mm anodized aluminium
Power : Internal battery (5 no of Panasonic ALKALINE type LR03T)
Batt. Life : Approx. 90 Hrs.
Process connection: ¼” BSP (M)
Model MGA N32-2
Display : 128X64 Backlit Graphic Display showing various pressure units
Along with LO BAT, MIN, MAX & BAR GRAPH
Range : -1 to 20 bar
Least count : 0.0001 bar
Accuracy : 0.05 % FS
Pressure media : DRY AIR ONLY
Enclosure : 90 mm anodized aluminium
Power : Internal battery (5 no of Panasonic ALKALINE type LR03T)
Batt. Life : Approx. 90 Hrs.
Process connection: ¼” BSP (M)
Model MGA N32-2
Display : 128X64 Backlit Graphic Display showing various pressure units
Along with LO BAT, MIN, MAX & BAR GRAPH
Range : 0 to 350 bar
Least count : 0.0001 bar
Accuracy : 0.05 % FS
Pressure media : DRY AIR ONLY
Enclosure : 90 mm anodized aluminium
Power : Internal battery (5 no of Panasonic ALKALINE type LR03T)
Batt. Life : Approx. 90 Hrs.
Process connection: ¼” BSP (M)
Model MGA N32-2
Display : 128X64 Backlit Graphic Display showing various pressure units
Along with LO BAT, MIN, MAX & BAR GRAPH
Range : 0 to 1000 bar
Least count : 0.0001 bar
Accuracy : 0.05 % FS
Pressure media : DRY AIR ONLY
Enclosure : 90 mm anodized aluminium
Power : Internal battery (5 no of Panasonic ALKALINE type LR03T)
Batt. Life : Approx. 90 Hrs.
Process connection: ¼” BSP (M)
